English 
français
español
português
العربية
Melayu
ไทย
Việt
हिंदी
Indonesia
Subscribe For Newsletter
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
Why Filter Plate Not Sealing
Since the filter chamber of the chamber filter press is formed by extruding and splicing filter plates one by one, and it is necessary to maintain a high-pressure working environment during filtration, naturally, whether it is solid or liquid inside, under the action of pressure, it has high efficiency.
Internal energy, if the gap between the chamber filter plate and the chamber filter plate is a little weak or there is a little gap, it will cause the liquid with powerful internal ability to be ejected. The filter plate scours out a one-to-one jet path. With the accumulation of time, this jet path will become larger and larger, and there will be many gaps between the filter plate and the filter plate.
The more gaps, the liquid is sprayed out. The more places there are, such a vicious circle will accelerate the damage of the recessed filter plate of the filter press, and finally lead to the fact that the filter plate of the filter press can no longer meet the basic conditions for the sealing of the filter press.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
2022-05-16
Membrane Filter Press Advantage
2022-04-28
IPv6 network supported
