wastewater treatment filter press
Filter Press
Home /

Filter Press

/(Part 1)How to Keep Square Filter Plate Filter Press

(Part 1)How to Keep Square Filter Plate Filter Press

Aug 15,2020

How to Keep Square Filter Plate Filter Press (Part 1)

Question 1: Leakage between the filter plates

Reasons: 

1. Oil pressure is not enough.

2. Residues on the sealing surface of the filter plate.

3. Filter cloth is not smooth even folded

4. Filter plate distortion caused by using low temperature filter plate to a high working temperature condition

5. Too high filtration pressure or too big capacity of the filter press feeding pump


Answers: 

1. Refer to Number 3

2. Clean up the sealing surface

3. Smooth the filter cloth

4. Replace the filter plates

5. Adjust it


Question 2:  Turbid Filtrate

 Reasons: 

  1. Breakage of the filter cloth of filter press.2. Wrong selection of the filter cloth

  2. Holes on the filter cloth is too big

  3. Suture opening

  4. Big stitch distance 


Answers:

1. Check and replace the filter cloth on the filter plate

2. Hold a test then select the filter cloth again

3. Replace with proper filter cloth for filter press

4. Re-sew the suture

5. Sew the filter cloth again with a proper stitch distance


Subscribe For Newsletter

For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.

leave a message
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

Contact