English 
français
español
português
العربية
Melayu
ไทย
Việt
हिंदी
Indonesia
Subscribe For Newsletter
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
Filter Press Safe Operation
1. During the filter press working, the operator shall not put his feet, hands, or head into the filter plate of the filter press or observe the belt conveyor or the middle groove from the gap between the opened filter plate. It is forbidden to put tools on the hook frame and on the handle of the filter plate.
2. Do not press the switch when there are people on the frame, machine top, or beam.
3. The hydraulic part of the filter press machine must be equipped with an electric contact pressure gauge.
4. It is forbidden to wear high heels and work barefoot. It is strictly forbidden to put your head and hands into the filter plate during the unloading process.
5. It is forbidden to operate the buttons with gloves, and only use wooden shovel (bamboo chips) for unloading.
6. Before work, check whether the operating buttons are flexible and reliable, and whether the unloader is synchronized.
7. Before work, pay attention to check whether there is any debris between the filter press plates and whether the filter cloth is wrinkled, and clean up in time after discovery.
8. During the horizontal filter press process, observe the outflow of the filtrate. When it is found to be damaged, write down the number and repair or replace the filter cloth in time.
9. Pay attention to check whether the filter plate is deformed or broken, and replace it in time when it is found. When replacing the filter plate, remove the filtrate tap first.
10. Wash the filter cloth as required to increase the water permeability of the filter cloth and improve the efficiency of filter press.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
2022-05-16
Membrane Filter Press Advantage
2022-04-28
IPv6 network supported
