-
(Part 1)How to Keep Square Filter Plate Filter Press
Aug 15 , 2020
How to Keep Square Filter Plate Filter Press (Part 1)Question 1: Leakage between the filter platesReasons: 1. Oil pressure is not enough.2. Residues on the sealing surface of the filter plate.3. Filter cloth is not smooth even folded4. Filter plate distortion caused by using low temperature filter plate to a high working temperature condition5. Too high filtration pressure or too big capacity...
Read More
-
Warning during Membrane Filter Press Operation
Aug 08 , 2020
Warning during Membrane Filter Press OperationBefore starting to work, make sure that the operation of the membrane filter press will not cause any danger.●Do not turn on the touchable terminal of electrical control cabinet when electricity is set on, nor open the connection box. Otherwise, it will cause error operation or electroshock.●Do not press “open” button to release the membrane filter pla...
Read More
-
How to maintain ceramic slip pump (Part 2)
Jul 28 , 2020
How to maintain ceramic slip pumpQuestion: 3. The slurry pressure of mud pump is fluctuating largely.Reason: (1) Single oil tank doesn’t have enough pressure(2) Air tank has not enough gas(3) There is much deposition below the air tank of filter press feed pump, let the air volume become small. Solution:(1) check and replace,or replace the seal ring(2) stop the pump , th...
Read More
-
How to maintain ceramic slip pump (Part 1)
Jul 23 , 2020
Question 1:The pressure of slip pump hydraulic system is abnormal or the noise of oil pump is so large that the slip pressure cann’t riseReason: (1) Oil filter is blocked up.(2) Oil is not enough in the oil box, so the oil pump could not absorb the oil(3) Oil pump is frayed and leak seriously.(4) Over-flow valve is broken(5) Hydraulic system has serious oil leak ( oil tube is broken; the seal...
Read More
-
How To Classify Filter Press
May 28 , 2020
Filter press is widely used in solid liquid separation. According to shape, structure and pressing pressure form, filter press has various of types. Shape ClassificationAccording to shape, filter press can be divided into vertical filter press, belt filter press and horizontal filter press. The horizontal filter press plays a central role in these three types. The ...
Read More
-
Questions and Answers For Filter Press Usage
Sep 24 , 2021
Questions and Answers For Filter Press Usage 1. How to judge that the filter press is full? (1) The model of the outflow liquid can be judged according to the water output of the tap. When the water flow basically stops, it means that the filter press is full. (2) Or by observing the working pressure of the ceramic plunger pump, if the pressure reaches about 1.5, it means that the s...
Read More
-
How to Inquire Filter Press
Oct 12 , 2020
How to Inquire Filter Press 1. What’s the size of the particle in the slurry. If it’s big and hard, it will break the filter cloth, even the plates2. what’s the temperature of sludge.3. what’s the PH value of sludge. If it’s acid, it need our filter press made of stainless steel to prevent corrup...
Read More
English 
français
español
português
العربية
Melayu
ไทย
Việt
हिंदी
Indonesia
Chinese New Year wishes
Assist in the production of electric porcelain factories
IPv6 network supported
