-
How to use and repair the mud Plunger Pump
Jan 10 , 2022
How to use and repair the mud Plunger PumpInstallation of the porcelain plunger pump: pour the concrete foundation according to the size of the foundation circle. The slurry pump is placed and leveled. The foundation circle should have drainage channels.Use of hydraulic ceramic plunger pump: Add hydraulic oil, and the oil level is based on the 2/3 position of the oil level gauge. Generally, N46 hy...
Read More
-
How to Dehydrate Sludge
Dec 28 , 2021
How to Dehydrate Sludge1. Concentration of sludge. The purpose of sludge thickening is to dehydrate sludge and reduce sludge volume, creating conditions for subsequent processing. Concentration and dehydration methods include gravity sedimentation concentration, floating concentration and other concentration methods.2. Sludge digestion. In order to reduce sludge amount, pr...
Read More
-
Common Problems During The Use of Slurry Plunger Pumps
Nov 19 , 2021
1. Why the ceramic plunger pump can't be pressurized?Generally speaking, the ceramic plunger mud pump can't add pressure, it may be the pump contains foreign objects.2. Why is the pressure of the sewage slurry mud pump unstable?At the beginning there is no problem happened. But the pressure is abnormal after 2 hours In this case, check if the oil lev...
Read More
-
How to replace easy-wearing parts of the ceramic plunger mud pump
Nov 03 , 2021
How to replace easy-wearing parts of the ceramic plunger mud pump?1. Replacement of seal ring of plunger mud pumpRemove the screws of water-pressing ring, adjust the overflow valve to gradually increase the system oil pressure, push the piston, use the mud pressure to loosen the seal ring, lift the piston and stop the ceramic mud pump, remove the connecting screw betw...
Read More
-
How to use and maintain Plunger Mud Pump
Oct 14 , 2021
How to use and maintain Plunger Mud Pump 1. When not in use, please place it in a dry, clean, and non-corrosive gas environmentmiddle. 2. The high-quality electric mud pump is guaranteed for 12 months from the date of delivery (except the easy wearing parts). If there is any damage during this period, our company undertakes the repair business and prepares other ...
Read More
-
Why ceramic piston pump has no oil pressure
Dec 07 , 2020
Why ceramic piston pump has no oil pressure?Recently one customer told that their ceramic piston pump has no oil pressure.Our tehnical said the cause as follows:Oil tube (inside the oil case) oil leakingThe oil pump is brokenThe pressure valve is broken.The iron seat is block or broken.Solution: Open the oil box, check the tube to see whether its oil leaking or not, if broken, chang...
Read More
-
How to maintain ceramic slip pump (Part 2)
Jul 28 , 2020
How to maintain ceramic slip pumpQuestion: 3. The slurry pressure of mud pump is fluctuating largely.Reason: (1) Single oil tank doesn’t have enough pressure(2) Air tank has not enough gas(3) There is much deposition below the air tank of filter press feed pump, let the air volume become small. Solution:(1) check and replace,or replace the seal ring(2) stop the pump , th...
Read More
-
How to maintain ceramic slip pump (Part 1)
Jul 23 , 2020
Question 1:The pressure of slip pump hydraulic system is abnormal or the noise of oil pump is so large that the slip pressure cann’t riseReason: (1) Oil filter is blocked up.(2) Oil is not enough in the oil box, so the oil pump could not absorb the oil(3) Oil pump is frayed and leak seriously.(4) Over-flow valve is broken(5) Hydraulic system has serious oil leak ( oil tube is broken; the seal...
Read More